
Electric11 installed a Fox ESS battery storage system, 5 kW inverter, Zappi EV charger and new double-stacked consumer unit at a home near Loddon, giving the customer a safer electrical setup and greater control over stored energy and vehicle charging.
The project brought several major upgrades together in one coordinated installation. Alongside the renewable-energy equipment, the existing consumer unit was replaced to support the property’s electrical requirements and provide suitable protection for the completed system.
The Customer’s Requirements
The customer wanted to improve how energy could be stored and used at the property while adding a convenient home charging point for an electric vehicle. They also wanted to understand the available options for using battery power during a power cut.
The work required Electric11 to consider the property as a complete electrical system rather than treating the battery, inverter and charger as separate additions. This included reviewing the existing supply equipment, consumer unit, cable routes and suitable positions for the new equipment.
Site Assessment and Installation Planning
The initial assessment identified that the existing consumer unit needed to be replaced as part of the wider upgrade. Photographs taken before and during the project documented the original distribution equipment, electricity meter position and available routes between the internal and external equipment.
Electric11 planned the installation around:
The existing electrical supply and metering arrangement
Space for the replacement consumer unit
Suitable circuit protection for the new equipment
A practical external position for the battery, inverter and charger
Neat cable routes between the property and the external installation
The customer’s energy-storage and EV-charging requirements
Customers planning a similar upgrade can read more about Electric11’s home battery storage installations in Norfolk, home EV charger installations and replacement consumer units.
Fox ESS Battery and 5 kW Inverter Installation
Electric11 installed the Fox ESS inverter and battery enclosure on an external brick wall in a sheltered area of the property. This position provided a compact arrangement while keeping the equipment accessible for operation and future maintenance.
The supplied project information records a 5 kW inverter and an approximately 11.5 kWh battery. The exact battery model and usable capacity should be checked against the commissioning documents before publication.
A home battery can store electricity for use later in the day, helping a household reduce peak-rate grid imports when it is configured around the property’s generation, tariff and consumption pattern. The benefit achieved at this property will depend on the source of the stored electricity and the customer’s operating settings.
Zappi EV Charger Installation
A wall-mounted Zappi charger was fitted alongside the inverter and battery equipment, creating a convenient charging point close to the customer’s parking area. The tidy grouping of the equipment also helped keep the external cable route compact.
Zappi supports grid, scheduled and renewable-energy charging modes, subject to the system configuration and available generation. Further product information is available from the official myenergi Zappi guide.
Electric11’s EV charger installation service in Norfolk includes assessment of the property supply, charger position, cable route and circuit-protection requirements.
Double-Stacked Consumer Unit Upgrade
The existing consumer unit was replaced with a new double-stacked Elucian unit. The completed installation provides organised circuit capacity and individual protective devices, including surge protection visible in the project photographs.
Replacing the distribution equipment formed an important part of integrating the home’s existing circuits with the battery storage and EV charging additions. The labelled arrangement also makes the installation clearer to inspect and maintain.
Property owners considering a similar electrical upgrade can learn more about consumer unit replacement in Norfolk.
A Coordinated Home-Energy Installation
Completing the battery, inverter, EV charger and consumer-unit work as one coordinated project allowed Electric11 to consider how the equipment would operate together. The finished external arrangement places the Fox ESS equipment and Zappi charger within the same service area, with contained cable routes and accessible isolation equipment.
The project delivered:
- Approximately 11.5 kWh of battery capacity, subject to final specification confirmation
- A 5 kW inverter for managing battery power
- Convenient home EV charging through the Zappi unit
- A replacement double-stacked consumer unit
- Modern circuit and surge protection
- Neat internal and external cable routing
- A platform for more flexible household energy use
Testing, Commissioning and Handover
The supplied job notes do not record the individual test results, certificate references or commissioning settings. These details should be checked before the page is published.
For this type of work, the completed circuits and equipment should be inspected, tested and commissioned in line with the installation design and manufacturer requirements. The customer should also receive guidance on using the battery controls, inverter monitoring and Zappi charging modes.
The Completed Result
The finished installation combines electrical safety, battery storage and EV charging within one practical home-energy upgrade. The new consumer unit supports the property’s modern electrical demands, while the externally mounted Fox ESS system and Zappi charger give the customer more control over when stored energy is used and when their vehicle is charged.
Electric11 provides battery storage, EV charging and electrical installation services across Loddon, Norwich and surrounding Norfolk communities. Customers in the wider area can also visit the Electrician in Norwich service page for information about local coverage.
Planning a Battery or EV Charger Installation in Norfolk?
Electric11 can assess your electrical supply, energy use, available installation space and charging requirements before recommending a suitable system. Contact Electric11 to request a clear quotation for battery storage, an EV charger or a coordinated electrical upgrade.
Request a Battery Storage and EV Charger QuoteElectric11 is composed of a team of local electricians based in Attleborough, offering coverage to the entire Norfolk region. Moreover, through our extensive network, we have forged strong connections with quality tradesmen representing various disciplines in our area.
The Electric11 Home Energy Installation Process
Battery storage and EV charger installations require careful planning across the electrical supply, equipment positions, cable routes and circuit protection. Electric11 follows a coordinated process to integrate each component safely while keeping disruption to the property to a minimum.
Site and Energy Assessment
The team reviews the existing electrical supply, consumer unit, metering equipment, available installation space and proposed cable routes. For this Loddon project, the assessment covered the battery, inverter, Zappi charger and the need for a replacement consumer unit.
System Design and Clear Quote
Electric11 selects suitable equipment and plans the required electrical upgrades around the customer’s energy use and charging requirements. The quotation sets out the installation scope, equipment, protective devices and expected programme before work begins.
Coordinated Electrical Installation
The electricians complete the agreed work in a planned sequence. This project included fitting a double-stacked consumer unit, installing the Fox ESS battery and 5 kW inverter, mounting the Zappi EV charger and completing the associated cable routes and circuit protection.
Testing, Setup and Handover
The completed electrical work is inspected, tested and configured for the installed system. The customer is then shown how to monitor the battery and inverter, use the Zappi charging modes and operate the relevant isolation equipment.
Electric11 installed a Fox ESS battery, a 5 kW inverter, a Zappi EV charger and a new double-stacked consumer unit at the property.
Some battery systems can support selected circuits during an outage when suitable backup equipment has been designed and installed. Backup capability is not automatic and must be confirmed for the specific inverter, battery and electrical design.
Yes. A Zappi charger can be configured to work with grid electricity and compatible renewable-energy systems. The charging behaviour depends on the installed monitoring equipment, available generation and selected charging mode.
The consumer unit was replaced as part of the wider electrical upgrade, providing organised capacity and suitable circuit protection for the property’s existing and newly installed equipment.
Yes. Electric11 installs home battery systems, EV chargers and related electrical upgrades in Loddon, Norwich and surrounding areas of Norfolk.














