Electric11 completed EICR remedial works in Norwich after an electrical safety inspection identified C1 and C2 observations at the property. The project focused on rectifying the higher-priority defects recorded in the original Electrical Installation Condition Report and preparing the affected parts of the installation for follow-up testing.
The remedial visit was report-led, allowing our electrician to concentrate on the documented safety concerns rather than carry out unrelated upgrades. Areas photographed during the work included the fire alarm supply and isolator, distribution-board labelling and other fixed electrical accessories.
| Detail | Specification |
| Location | Norwich |
| Project type | EICR remedial works |
| Original observations | C1 and C2 |
| Main objective | Rectify the safety defects listed in the EICR |
| Materials recorded | Screws, Wago-style connectors, silicone and short cable lengths |
| Certification status | Follow-up EICR certificate listed for issue after completion |
An EICR assesses the condition of a property’s fixed electrical installation and records defects using recognised classification codes. A C1 observation means danger is present and immediate action is required. A C2 observation identifies a potentially dangerous condition that requires urgent remedial work.
The earlier inspection at this Norwich property recorded items within both categories. Electric11 used the original report as the scope for the remedial visit, working through the affected locations and correcting the safety concerns identified by the inspector.
Property owners who need fixed-wire testing or help understanding an existing report can learn more about obtaining an EICR certificate in Norwich.
The project photographs document a fire alarm supply and isolating switch, distribution-board labelling showing that damaged fire alarm equipment had been disconnected at the spur, and other fixed accessories associated with the inspection. These visual records helped identify the areas requiring attention and supported the report-led repair process.
The work remained focused on the C1 and C2 observations listed in the EICR. No broader refurbishment, full rewire or unrelated electrical improvement was included in the supplied job record.
Where a defect is not immediately visible, professional electrical fault finding can help trace the affected circuit, connection or accessory before the correct repair is completed.
The remedial work used small quantities of electrical and general consumable materials rather than major replacement equipment. The recorded materials included:
Screws and fixings
Wago-style electrical connectors
Silicone or sealant
Short lengths of cable
Using targeted materials allowed the electrician to address the report observations while retaining serviceable parts of the existing installation.
After remedial work, the affected circuits and accessories require verification to confirm that the recorded defects have been addressed. The supplied job notes state that a follow-up EICR certificate was to be issued once the necessary work had been completed.
The final report outcome should be checked against the completed testing documentation before this case study is published as a satisfactory EICR. This prevents the page from making a certification claim before the signed report is available.
The targeted repairs addressed the C1 and C2 items within the recorded scope, reducing the electrical risks associated with those observations. The property was then prepared for the required follow-up testing and updated documentation.
This report-led approach kept the work focused and limited disruption while moving the fixed electrical installation towards a satisfactory recorded condition.
Electric11 provides inspection, fault diagnosis and remedial electrical work for property owners, landlords and businesses throughout Norwich. Our electricians in Norwich can review an unsatisfactory report, explain the observations and provide a clear quotation for the required repairs.
For business premises and managed buildings, our commercial electricians in Norwich can also assist with fixed-wiring concerns, planned maintenance and safety-related electrical work.
If your report contains C1, C2 or FI observations, contact Electric11 to arrange the next steps.
Request an EICR Remedial QuoteElectric11 is composed of a team of local electricians based in Attleborough, offering coverage to the entire Norfolk region. Moreover, through our extensive network, we have forged strong connections with quality tradesmen representing various disciplines in our area.
We understand that electrical remedial work can affect access to circuits and parts of a property. Our process keeps the work focused on the report findings, with clear communication and minimal disruption from the initial review through to final testing.
Review the EICR Findings
Our electrician reviews the existing inspection report, classification codes and affected circuits before planning the remedial visit. This establishes the required scope and identifies any safety-critical observations that need priority attention.
Provide a Clear and Competitive Quote
We provide a transparent quotation covering the identified repairs, expected materials and testing requirements. The agreed scope stays tied to the report unless further defects become visible and need to be discussed.
Complete the Required Remedial Work
The electrician repairs or replaces the affected components using materials suited to the existing installation and the observations recorded. Work is completed carefully, with affected areas left clean and accessible for verification.
Retest and Update the Documentation
The repaired circuits and accessories are tested after the work. The resulting documentation records the completed remedial action and confirms the installation status once the final assessment has been completed.
