A useful garage workshop needs power and lighting positioned for the work carried out there. For this Norwich project, Electric11 completed a garage electrics installation covering a garage distribution board, multiple double sockets, fused spurs, LED batten lighting and an IP-rated double socket. The job record also identifies surface trunking for the workshop sockets.
The work brought several everyday requirements into one electrical scope: outlets around the work area, a dedicated board for distribution and protection, lighting for the garage, and fused connections for the garage door and an older lighting system. The supplied details do not give final circuit design, socket counts or the exact LED batten model, so those specifications should be checked before publication.
| Field | Confirmed information |
|---|---|
| Location | Norwich, Norfolk |
| Space | Garage used as a workshop |
| Distribution | Garage distribution board installed |
| Power outlets | Multiple double sockets installed in surface trunking within workshop; one IP-rated double socket listed |
| Other connections | Fused spurs for a garage door and an older lighting system |
| Lighting | 6 ft LED batten fittings listed; exact final type and number need confirmation |
| Documentation | An electrical certificate will be issued by Electric11 in line with BS 7671; issuance has not been verified |
The brief called for more usable socket access in the garage. Electric11 fitted multiple double sockets using surface trunking within the workshop, along with a garage distribution board. A workbench, tools and other equipment all influence where outlets are useful, but the job record does not identify particular appliances or their loads. Those details should inform the circuit and socket layout for any similar project.
The scope also included fused spurs serving a garage door and an older lighting system. These connections are separate from the workshop’s general sockets. The available notes do not confirm the garage door motor model, the old lighting type or how the final circuits were arranged, so this case study avoids attributing features that have not been recorded.
Lighting was part of the garage upgrade, with 6 ft LED battens identified in the materials list. Batten fittings can provide a practical spread of light for general garage use and workbench tasks. The supplied brief explicitly flags the type of final LED battens as a detail to check. Until the model and installed quantity are verified, this page should avoid promises about brightness, colour temperature, wattage or energy savings.
An IP-rated double socket was also included in the scope. IP-rated products have declared levels of protection against ingress, but the project notes do not state the socket’s IP code or final position. An editor should not identify one of the exterior details in the supplied photographs as the finished IP-rated double socket: the close-up shows wall-mounted electrical items, yet the image alone does not verify the specified outlet.
For a workshop, useful decisions start with the tools and equipment that need power, the position of the work area and the lighting needed at each point. Electric11 undertakes electrical work across Norwich and Norfolk. Its Norwich electrician page covers local service, while its lighting service explains lighting options and the electrical services page provides broader context. Links from those service pages into this case study would give readers a relevant Norwich workshop example.
If your garage in Norwich needs a distribution board, more workshop sockets or better lighting, speak with Electric11 about the space and how you use it. Call 01953 661 155 or request a garage electrical quote.
Request a Garage Electrics Quote
Discuss the positions of the workbench, garage door, existing lighting and equipment likely to need a socket. An electrician can then assess the existing supply and the practical limits of the space.
Agree the location of the garage distribution board, workshop sockets, fused connections and any IP-rated outlet. The appropriate cable route and protection depend on the site and the agreed design.
Fit the specified board, double sockets, fused spurs, LED battens and IP-rated socket. Keep the actual job record and final product schedule aligned if models or quantities change during installation.
The project source says Electric11 will issue an electrical certificate in line with BS 7671. Confirm testing results and obtain the final certificate before changing that statement to “issued” on a live page.
The project record lists a garage distribution board, multiple double sockets fitted in surface trunking, fused spurs for a garage door and an older lighting system, 6 ft LED battens and an IP-rated double socket. The garage was used as a workshop. The exact socket count, the installed LED batten type and the final circuit details were not supplied.
Yes, multiple double sockets were part of this Norwich installation. The right number and location depend on how the workshop is used, the existing supply and the loads of the intended equipment. The supplied project notes confirm surface trunking in the workshop but do not give a socket count, so any proposed layout should be checked on site.
A garage distribution board houses protective and switching equipment for the circuits it serves. Electric11 installed one as part of this project’s wider power and lighting work. The job record does not describe its breaker types, circuit ratings or supply arrangement, so those details cannot be inferred from the photograph of an older electrical enclosure or applied to another garage without assessment.
LED battens can suit general workshop lighting, subject to the room layout, mounting height and the tasks being carried out. This project lists 6 ft LED battens, but its notes flag the final type for confirmation. Wattage, number, colour temperature and lighting levels must be checked against the installed products before any specific performance claim is added to the case study.
The project scope lists one IP-rated double socket, although it does not record its exact location or rating. IP ratings describe a product’s declared resistance to the ingress of solids and water at a specified level. The right product depends on its position and exposure. The photographs do not establish the final socket specification, so the actual fitting should be checked before captioning it.
This job included a fused spur for a garage door and another for an older lighting system. The suitable connection and protective arrangement depend on the door equipment, circuit design and product instructions. The available notes do not name the garage door or motor, so they support the recorded work scope but no claim about a particular door system.
It might, but this case study has no verified before-and-after wattages, operating hours or electricity bills. The lighting example above is a calculation using assumed fittings, not a claim about the Norwich garage. A meaningful estimate needs the wattage and quantity of both the previous and installed lights plus realistic daily use and the customer’s unit rate.
The supplied project notes state that Electric11 will issue an electrical certificate in line with BS 7671. They do not confirm that the certificate has been issued or provide a copy. The final documentation status should be checked with the project team before describing certification as complete on the website. Customers can ask what paperwork applies to their proposed installation when requesting a quote.
Share the garage’s intended use, photos of its current electrical setup, the tools or equipment you plan to run and your preferred workbench and lighting positions. Electric11 can then discuss the work and arrange the appropriate assessment. Call 01953 661 155 or use the contact page to request a Norwich garage electrical quote.
