Electric11 completed a greenhouse power installation in Attleborough, providing a practical electrical supply from the property’s garage. The project added a weather-resistant double socket that can support suitable greenhouse equipment without relying on temporary extension leads across the garden.
To create a protected outdoor route, the team installed 2.5mm² steel wire armoured cable within 25mm conduit in a garden trench. The completed electrical work was tested, and an Electrical Installation Certificate was issued in line with BS 7671.
The homeowner needed a permanent source of electricity inside the greenhouse. A fixed supply would make it easier to operate compatible lighting, propagators, small tools or other gardening equipment while keeping the garden free from temporary extension cables.
The new supply needed to run from a fused spur in the garage, cross an outdoor area and terminate at a socket suitable for the greenhouse environment.
Outdoor electrical work requires a route that protects the cable from weather, gardening activity and accidental damage. Electric11 assessed the route between the garage and greenhouse before placing the cable within the garden trench.
The installation used 2.5mm² steel wire armoured cable, commonly referred to as SWA cable. A 25mm conduit added protection along the buried section of the route. The trench was then reinstated to leave the garden tidy once the cable was in position.
Inside the greenhouse, Electric11 fitted one double IP-rated socket outlet. Its weather-resistant enclosure provides a more suitable connection point for an outbuilding environment than a standard indoor socket.
The socket gives the homeowner two convenient outlets from one fixed location. Any equipment connected to the supply must remain within the circuit’s rated capacity and be suitable for its intended use.
Once the greenhouse power installation was complete, Electric11 tested the work and issued an Electrical Installation Certificate in line with BS 7671 requirements. This documented the completed addition and confirmed the test results recorded for the installation.
The finished installation provides a permanent connection point inside the greenhouse. The protected underground cable route keeps the supply discreet, while the IP-rated socket offers convenient access to power where the homeowner needs it.
The homeowner can now use appropriate greenhouse equipment without running a temporary extension lead from the house or garage.
Electric11 installs dedicated power supplies for greenhouses, garden rooms, garages and other outbuildings across Attleborough and Norfolk. Each system is planned around the cable route, required load and intended use.
Explore Electric11’s power supply installations or contact the team for a free quote.
Bring Reliable Power to Your GreenhouseElectric11 is composed of a team of local electricians based in Attleborough, offering coverage to the entire Norfolk region. Moreover, through our extensive network, we have forged strong connections with quality tradesmen representing various disciplines in our area.
Electric11 plans outdoor power installations around the property, intended equipment and available cable route. This keeps each stage focused on practical use, protection and electrical compliance.
Supply and Route Assessment
An electrician reviews the existing supply, intended greenhouse use and proposed route from the property to the outbuilding.
Trench and Cable Protection
The outdoor route is prepared, and armoured cable is positioned with suitable mechanical protection for the buried section.
Weather-Resistant Socket Installation
An IP-rated socket is fitted in a practical greenhouse location and connected to the new supply.
Testing and Certification
The completed electrical work is tested, documented and certified in line with the applicable wiring regulations.
