Electric11: Ground Mounted Solar Panel Installer Mulbarton
Ground-mounted solar can suit a Mulbarton property with usable garden, paddock or commercial land, particularly when the roof cannot accommodate the desired array. The design still has to preserve practical access, account for neighbouring views and fit around how the land will be used over the life of the system.
Electric11 reviews the proposed position, shade pattern, screening, ground conditions, trench route and electrical installation before recommending an array. The quotation can then define the mounting system, panels, inverter, storage options, groundworks and connection work for that site.
"*" indicates required fields
A ground array may be worth exploring when the roof is shaded, fragmented, structurally unsuitable or too small for the required output. It may also support a larger household, workshop, heat-pump plan or EV-charging demand when enough land is available.
Using land introduces trade-offs that a rooftop system does not. The array occupies usable space, changes views across the plot and may need landscaping, fencing or a longer buried cable. The decision should compare output, disruption, visibility and total installed cost rather than treating ground mounting as the automatic premium option.
Customers comparing both formats can also review Electric11’s Mulbarton rooftop solar service.
Assess My Mulbarton Site
A useful Mulbarton survey brings land use, appearance, construction and electrical demand into one design. Electric11 can assess:
The proposal should record the assumptions behind its generation estimate. Figures from another property are useful as evidence of experience, not as a forecast for Mulbarton.
Assess My Mulbarton SiteElectric11 is composed of a team of local electricians based in Attleborough, offering coverage to the entire Norfolk region. Moreover, through our extensive network, we have forged strong connections with quality tradesmen representing various disciplines in our area.
The best-performing position is not always the best overall location. A Mulbarton design should consider the array from the home, neighbouring properties and nearby public viewpoints. Existing hedges can provide screening, but their present height and future growth must be modelled as potential shade rather than treated as a permanent visual solution.
The layout also needs to protect the remaining use of the plot. Row spacing, gates, mowing access, drainage paths and the movement of garden or agricultural equipment should be decided before foundations are installed. Fencing or other protection may be appropriate where children, animals or vehicles could reach the equipment.
After installation, Electric11 also provides solar panel maintenance in Mulbarton.
Compare Roof and Ground Solar
Cable distance can change the economics of a ground array. Longer routes can increase conductor size, voltage-drop considerations, excavation, reinstatement and protective measures. The surveyed route should avoid known services, important roots, drainage systems and areas likely to be developed later.
Inverter and battery positions also affect the route. The equipment needs suitable access and environmental conditions, while the connection design must account for the consumer unit, earthing, meter arrangement and available capacity. The quotation should separate array work, trenching, reinstatement and any remedial electrical work so the scope remains clear.
See Electric11’s wider ground-mounted solar service in Norfolk.
Compare Roof and Ground SolarStand-alone solar equipment can be subject to planning conditions and limitations. The position, scale, boundary relationship, visibility and setting of a listed building or designated area can change what is permitted. Ask the local planning authority to confirm the current position for the specific site before treating a general summary as approval.
The electricity network connection route also depends on the proposed generating capacity and local network. Some systems can follow a notification process, while others require approval before connection. Electric11 can identify the likely route during design and complete the relevant technical process for the agreed installation.
Check the current national summary on the Planning Portal solar-panel guidance.
Technical connection information is available from the Energy Networks Association.
Plan a Screened Solar Array
Battery storage can retain some solar generation for use later, which may increase the share consumed on site. Capacity should reflect the expected array output, daytime demand, evening use, tariffs, equipment compatibility and any backup-power goal. A larger battery is not automatically the better-value choice.
The design should explain where the battery and inverter will be installed, what usable capacity is proposed and how monitoring will work. Export income and savings remain dependent on actual generation, consumption, electricity prices and tariff terms.
Compare the options on Electric11’s home battery storage page for Mulbarton.
Plan a Screened Solar Array
01
We review the property, the issue, and the work required before recommending the most suitable electrical solution. This may include checking existing wiring, the consumer unit, available power supply, access, and any safety concerns.
02
You receive a clear quotation outlining the work, materials, expected timescale, and next steps. If you are comparing options, we can explain the practical differences between repairs, upgrades, and full replacement where relevant.
03
Our electricians complete the work safely, cleanly, and with minimal disruption to your home or business. This applies across everything from consumer unit replacement and home rewiring to EV charger installation and solar PV work.
04
Where required, we complete the necessary testing and provide the correct certification for your records. For landlords and property managers, this may include EICR certificates or other electrical safety documentation.
Electric11 has published a ground-mounted solar and battery project at North Pickenham in Norfolk. The recorded installation used 48 panels rated at 405 W across three ground arrays, giving a stated total capacity of 19.44 kW. Those figures belong to that project and should not be presented as expected results for another site.
A second published Breckland installation records fourteen 445 W panels, a 5 kW hybrid inverter and 5.18 kWh of battery storage. These projects show experience across different scales. They do not establish what will fit, generate or save at a Mulbarton property; the local design still needs its own survey and performance model.
View the North Pickenham ground-solar case study.
Read the Breckland solar and battery case study.
Implementation check: confirm both case-study canonical URLs in WordPress before publishing and update the links if either redirects.
Request a Site-Specific Quote
A transparent scope makes it easier to compare proposals and reduces uncertainty around groundworks, cabling and additional electrical work.
Customers can browse further verified work in the Electric11 case-study library.
Request a Site-Specific QuoteContact Electric11 to discuss a ground-mounted array for a Mulbarton home, paddock or commercial site. Photos taken from several directions, recent electricity bills, an approximate cable distance and details of planned EV or heating loads will make the first assessment more useful.
Telephone: 01953 661 155
Email: electric11@electric11.co.uk
Send the project details through the Electric11 contact page.
Get a Mulbarton Solar Quote
Can’t find what you’re looking for?
Get in touch with any questions.
Suitability depends on usable unshaded space, continued land use, ground conditions, access, boundaries, screening, the cable route and the electrical connection. A site survey is needed before a reliable design can be produced.
Stand-alone arrays are subject to conditions and limitations, and the position can differ for larger systems, listed buildings and designated areas. Confirm the current position for the specific site with the local planning authority.
The footprint depends on panel count, row spacing, tilt, shading and maintenance access. The usable plot must also leave enough room for existing garden functions, gates, drainage and any equipment that needs to move around the array.
A buried route may be suitable, but it must account for cable sizing, voltage drop, protection, depth, underground services and the ground that will be disturbed. The quotation should define the agreed route and trenching scope.
Yes. Battery storage can be designed with a new array where the equipment, location and electrical installation are suitable. Capacity should reflect generation, consumption, tariffs and the customer’s objectives.
Call 01953 661 155, email electric11@electric11.co.uk or use the contact form. Share the Mulbarton address, recent electricity use, photographs of the land and any known planning or access constraints.
Electric11 upgraded a home near Loddon with a Fox ESS battery and inverter, a Zappi EV charger and a new double-stacked consumer unit, creating a safer and more flexible electrical system.
Electric11 upgraded a garage in Bressingham with galvanised double sockets, USB-A/C charging points, surface-mounted conduit and 12 metres of LED lighting. The project also included socket and lighting alterations in the house, followed by inspection, testing and certification.
Electric11 relocated an existing Myenergi Zappi charger by approximately 20 metres at a Norwich home, extending and testing its protected 32 A circuit before issuing a Minor Works Certificate.
Electric11 installed two Fox ESS EP12 batteries and a 10.5 kW inverter at a Norwich home, providing 23.04 kWh of nominal storage with protected electrical integration.
Electric11 upgraded an existing consumer unit at a Wicklewood home with an 18th Edition RCBO consumer unit and surge protection device, then tested the installation in line with BS 7671.
Electric11 installed and tested additional double sockets at a veterinary laboratory in Attleborough, giving workstations and equipment more practical access to power.
Electric11 replaced the main-floor DB2 at an Attleborough workshop with a modern 12-way three-phase distribution board, reconnecting and clearly labelling machinery and socket circuits before testing and certification.
Electric11 installed a tethered black Zappi EV charger with a dedicated cable run and protective upgrades at a home in the Watton and Thetford area.
Electric11 installed and configured a customer-supplied 7 kW tethered Zappi EV charger in Wymondham, including a 15-metre cable run, surplus-solar monitoring, surge protection and a Type A RCBO.
Electric11 installed a tethered Zappi EV charger and serviced an existing 8 kW solar PV and battery system in Cantley near Norwich, completing detailed system checks and a satisfactory EICR.
Electric11 installed a high-output solar PV system with a Fox ESS hybrid inverter at a Great Ellingham home, providing clean on-site generation and a platform for smarter energy use.
Electric11 installed a garage-roof solar PV system near Diss, pairing a 3.6 kW hybrid inverter with 11.52 kWh of Fox ESS battery storage. The project also included meter and garage-board integration, dedicated protection and a carefully planned roof layout.
Electric11 installed six 460 W solar panels, a Fox inverter, new garage distribution and cabling at an Attleborough home.
Electric11 assessed an existing solar PV system and associated electrical records in Long Stratton, highlighting documentation conflicts and items requiring follow-up.
Electric11 completed trenching for a pump electrical supply at Pip’s Bothy in Lower Common, East Runton. The project records and follow-up photographs also document the existing pump, cable route and intake equipment so that the next electrical work could be scoped safely.
Electric11 installed a 16-panel solar PV system, 11.52 kWh Fox ESS battery and Zappi EV charger at a Wymondham bungalow, creating one integrated home-energy system.
Electric11 added a 7 kW Fox ESS hybrid inverter and 11.52 kWh heated battery to an existing solar-powered home in California, near Great Yarmouth. The retrofit also included cable alterations, protection, commissioning and BS 7671 certification.
Electric11 completed PAT testing for a Wicklewood ice cream business, checking mobile catering equipment, freezers, leads and everyday appliances. Several clear pass readings were recorded, while a failed result showed the value of testing equipment before continued commercial use.
Electric11 installed a 7 kW Myenergi zappi home charger in Norton, adding new consumer units and a protected underground supply to a detached garage.
Electric11 installed a 23.04 kWh FOX ESS home battery storage system at a Norwich property, combining two EP12 Plus batteries with a hybrid inverter, protected consumer-unit connections and cabling to the main house.
Electric11 completed key electrical installation work for the new Wymondham Banking Hub, installing a communications rack and terminating a commando socket to provide power to the rack busbar. The work was coordinated within an active commercial fit-out at 45 Market Street.
Electric11 retrofitted Fox ESS battery storage to an existing solar installation at a Barnt Green home, improving how surplus generation could be used.
Electric11 upgraded a Long Stratton home with a 4.45 kW solar array, Fox ESS hybrid inverter and 5.18 kWh battery storage system.
Electric11 installed a FastAmps EV charger at an Attleborough vehicle workshop, completing the dedicated charging circuit alongside an EICR and PAT testing across 60 portable items.
Electric11 completed targeted EICR remedial works at a Norwich property, addressing C1 and C2 safety observations and preparing the fixed electrical installation for follow-up testing and certification.
Electric11 replaced an older analogue solar generation meter at a Norwich property with an Emlite ECA2 100A single-phase kWh meter, providing clear digital recording for the existing solar PV system.
Electric11 replaced a damaged sauna light and associated wiring at a leisure property in Attleborough, restoring safe and reliable illumination.
Electric11 completed a garden room electrical installation in Norwich, adding a protected supply, local consumer unit, lighting and practical socket provision for a new music space.
Electric11 checked and tested a wall light lamp holder at an Attleborough home after bulbs failed to operate correctly, confirming safe circuit conditions and compliance with BS 7671.
Electric11 installed a customer-supplied 7 kW SolaX home charger at Cherry Tree, supported by a dedicated cable run, surge protection, a Type A RCBO and replacement protective devices.
Electric11 upgraded the outside of an Attleborough home with six wall lights, three weather-resistant double sockets, three replacement switches, a fused spur and carefully routed exterior cabling.
Electric11 replaced an earth bond at a Suffolk home, completed the associated electrical testing and issued a satisfactory EICR, giving the customer clear confirmation that the recorded remedial work had been completed.
Electric11 upgraded a commercial motorsport workshop with a dedicated car-lift supply, rotary isolation, 18 LED fittings and two PIR-controlled floodlights.
Electric11 completed targeted EICR remedial works at an Attleborough property, addressing C1 and C2 observations identified during an electrical safety inspection.
Electric11 installed a certified greenhouse power supply in Attleborough using buried 2.5mm² SWA cable, protective conduit and a weather-resistant double socket.
Electric11 restored lighting throughout a Kenninghall home by replacing failed bulbs across multiple rooms and confirming that the affected light fittings were working again.
Electric11 replaced an existing shower in Norwich with a Mira Advance 8.7kW thermostatic electric shower, tested the dedicated circuit and issued a Minor Electrical Installation Works certificate.
Electric11 upgraded a conservatory in Wymondham with six downlights, a replacement LED strip, relocated sockets, new double sockets and surface trunking for a brighter, more practical space.
Electric11 installed an Evec EV charger at an Attleborough home, including dedicated cabling, trenching, post mounting, surge protection, a Type A RCBO and full electrical testing.
Electric11 installed a 13.8 kWp solar array, 7 kW FOX hybrid inverter, approximately 23 kWh of battery storage and a failover system at a home near Carvers Lane, Attleborough. The system helps the property generate, store and manage more of its own electricity.
Electric11 added three Pylontech US5000C batteries to an existing three-phase Victron system in Wymondham. The 14.4 kWh upgrade increased total battery storage to 56.4 kWh—a 34.3% capacity increase.
In Attleborough, Norfolk, Electric11 completed a 3.9 kW solar installation for a bungalow property, featuring 12 × 325 W full-black panels, a Solis 3.6 kW hybrid inverter, and a Puredrive 5 kWh battery. The system is designed to generate around 3,400 kWh per year, delivering annual savings of £918, reducing CO₂ emissions by 851 kg, and cutting grid reliance by 70%.
Electric11 installed a 1.82 kW shed solar power system in Attleborough, Norfolk, featuring 4 × 455 W full-black panels and a Fox Hybrid 1.0 kW inverter. This compact setup is expected to generate 1,300 kWh of clean energy per year, delivering annual savings of £351 and cutting 299 kg of CO₂ emissions — a smart, efficient solar solution without battery storage.
In Breckland, Norfolk, Electric11 delivered a 6.2 kW solar farm installation featuring 14 × 445 W full-black panels, a Fox Hybrid 5 kW inverter, and a Fox ESS 5.18 kWh battery. The system is expected to generate around 5,706 kWh of renewable energy per year, providing annual savings of £601.23, reducing CO₂ emissions by 1,181 kg, and achieving a 67% decrease in grid reliance.
Taking a clean and practical design approach, our focus was on creating an efficient area dedicated to renewable energy generation. Following a full review of the land, we installed a ground-mounted array featuring 48 × 405 W full-black panels arranged across three separate arrays. We advised that a 19.44 kW total system size would be the most suitable configuration for the property’s energy needs.
Taking a clean and efficient approach, our focus was to design a system that made the most of renewable energy potential. After evaluating the property, we fitted 10 × 445 W full-black panels arranged across two separate arrays. A total capacity of 4.45 kW was determined to be the most effective solution for the property’s size and energy requirements.
Taking a straightforward and modern approach, our aim was to design a practical space focused on generating clean, renewable energy. After evaluating the property, we installed a carport solar array featuring 9 × 445 W full-black panels. We determined that a 4 kW system would deliver the best balance of efficiency and suitability for the property’s energy demands.
