Replacement Consumer Unit in Hethersett
At Electric11 Ltd, we provide a professional consumer-unit replacement service for homeowners, landlords and businesses across Hethersett.
Our experienced team will replace your existing fuse board or distribution board with a modern dual-RCD consumer unit up to 10 ways, including certification and building-control notification. You’ll get full peace of mind knowing your installation meets the latest standards.
"*" indicates required fields
If your property still has an older fuse-box (ceramic fuses, rewireable blocks, or a single RCD/no RCD arrangement) then it may not comply with current safety standards. A modern consumer unit will:
Our aim is minimal disruption: we plan the upgrade at a time convenient to you, and leave your property clean and safe.
Book your free quote todayThis service is ideal for:
If you’re uncertain whether your board needs replacing, our survey will give you clarity — we’ll highlight whether simple upgrades will suffice or a full replacement is recommended.
Book your free quote today
When learning to understand consumer units, also recognised as fuse boxes or electrical distribution boards, we must first understand that are replaced is because yours don’t have an RCD (Residual Current Device)
Why do I need an RCD?
A fuse box or a circuit breaker is designed to protect your installation and your assets. Visually, these are determined by the cable in the wall and the cooker at the end of it.
At Electric11, we install an RCD. They are far more sensitive under earth fault conditions so if you or a family member are receiving an electric shock the power trips off quickly before it causes injuries or disturbances to the property or the residents.
At Electric11, we ensure that all of our RCD’s are reliable and safe to install before installing all consumer units. The types of RCD’s we use typically range, and each has a separate purpose.
AFDD – Tier 1
AFDD, also recognised as Arch Fault Detection Device, is a brand new type of device that does all the jobs of a Fuse or Circuit Breaker, alongside the job of an RCD.
Plus, it can detect arching in circuits, which can cause fires if left unattended to.
These fires are often caused by poor installation or damaged wiring, and so installing new consumer units such as AFDD’s are important.
AFDD’s can be a significant upgrade for high ignition premises, such as thatched buildings for instance, where a fire risk is much more likely to cause significant damage to a property or residents.
RCBO – Tier 2
RCBO, also recognised as the Residual Current Breaker & Overload, is an RCD incorporated into a Circuit breaker.
The RCBO is a great new model for domestic properties as it directs attention towards electrical faults and electrical leaks.
However, it is less reliable at catching smaller sparks in comparison to the AFDD, and can therefore cause more potential fire hazards to the property or residents. Thatch roofed properties, for example, would be more inclined to need an AFDD.
The RCBO ensures every circuit has its own earth fault protection.
Dual RCD – Tier 3
With this fuse board, you get two RCD’s and several circuit breakers that provide electricity to your circuits, such as your sockets and lights.
This is fully compliant and regulated RCD which affords you the required level of protection that every property needs.
However, unlike an RCBO or AFDD, if an earth fault occurs on one circuit, it can affect all other circuits that are supplied by that RCD. With this issue, you will not be able to turn any circuits back on until the fault is resolved. If left unresolved, it can become hazardous to both the property and residents.
Here is an example of a Duel RCD Board installed by Electric11 in Norfolk.
Our consumer unit installation costs in Hethersett start from just £650.00.
The systems we install are designed to enhance efficiency, allowing you to distribute your electricity safely and with ease. With advanced consumer technology, you can reliably protect your property from any potential future hazards.
Alongside this, our team at Electric11 offers installation support, ensuring that you have a hassle-free experience. Invest in your consumers with our reliable and safe team today!
More about us
What is a Consumer Unit?
Home consumer units, also known as fuse boxes, refer to the not a device that directly powers appliances, but rather a central system that distributes electricity and protects against electrical faults.
These are typically put in domestic locations such as houses or garages to ensure an even distribution of electricity around your property.
Retrofitting a consumer unit in Hethersett is an excellent option for homeowners looking to enhance their electrical setup.
Fuse boxes are a need in any home to allow for safe electrical supply, retrofitting allows you to integrate a modern energy storage solution for each residential property.
Benefits include:
Seamless Integration
Add a consumer unit to your energy system with minimal disruption.
Scalability
Expand your system’s capacity as your energy needs evolve.
Improved Efficiency
Optimise energy use and reduce fire hazards.
Our team specialises in retrofitting consumer unit systems, ensuring compatibility with your existing setup and delivering maximum performance and savings.
At Electric11, we understand the importance of connecting electrical power for all properties.
That’s why we offer the option to install a consumer unit, to provide you with your property needs for the new modern electrical world.
This innovative solution ensures you still have electricity on dedicated circuits throughout your house, ensuring a safe transition from old circuit supply to new.
Key Features of Our Consumer Unit System:
Seamless Transition
Our supply systems are designed for quick and automatic switching. At Electric11, we take pride in making sure that your system automatically kicks in, ensuring you experience minimal disruption from the old electrical system to new.
Enhanced Peace of Mind
With an new power supply installed such as AFDD, you can live safely knowing you are prepared for hazards or fire-risk circumstances. This is especially valuable during severe hazards or other emergencies, such as any potential electrical fires.
Implementing electrical distribution board systems in your home can contribute to significant environmental benefits:
Easier Renewable Energy Integration
By promoting our newer consumer units, you can accommodate solar panel systems and home battery storage systems more freely and safely.
Alongside this, new fuse boxes work well with transportation and electric car support, allowing smoother transport and reducing carbon emissions with each journey taken.
New Fuse Boxes made with Recycled Materials
Newer models of the consumer unit are made with recycled metals and plastic, which in turn is helping with eco-friendly means and providing newer ways to promote recycling. Our team at Electric11 promote environmentally friendly products to all of our customers, allowing for a new consumer unit power system that is both safe and eco-healthy!
Encouraging Renewable Energy
By using newer consumer units, you are able to power more for your homes and, in turn, give your home a prominent power circuit that can power higher-powered items, such as solar panels which give back to the grid. This promotes a healthy and green-safe option for all homeowners and encourages renewable resourcing.
Electric11 is composed of a team of local electricians based in Attleborough, offering coverage to the entire Norfolk region. Moreover, through our extensive network, we have forged strong connections with quality tradesmen representing various disciplines in our area. As a result, we are empowered to provide a comprehensive one-stop service that fulfils all your requirements.
Alongside our office in Attleborough, we are also based throughout Norwich and provide daily services within central Norwich and surrounding areas. So don’t worry if you feel we are too far, we can still reach you!
Experienced Local Consumer Unit Experts in Hethersett
As your local consumer unit installer, we understand the unique local needs while staying updated with global industry trends to provide tailored solutions. Experience matters when it comes to installing new and reliable fuse boxes, which is why we are at the forefront of the consumer revolution. Our skilled technicians ensure safe and efficient consumer setup.
Customer-Centric Approach
We recognize that every customer has unique property needs and preferences, and we make it a priority to listen and customize our services accordingly.
Our goal is not just to install consumer units, but to create a seamless and satisfying experience for every fuse box owner. It’s our unwavering commitment to this customer-centric approach that distinguishes us, making us the top choice for consumer unit installations.
Reliability, Quality and Seamless Consumer Unit Installation Process
Electric11 values your time, so our installation process is seamless, efficient, and minimises disruption.
From assessment to set-up, we handle every step with expertise. We source top-of-the-line consumer units and materials to ensure that your properties are built to last. We stand behind our work, offering warranties and post-installation support, giving you peace of mind.
Can’t find what you’re looking for?
Get in touch with any questions.
Home consumer units, also known as fuse boxes, refer to the not a device that directly powers appliances, but rather a central system that distributes electricity and protects against electrical faults.
These are typically put in domestic locations such as houses or garages to ensure an even distribution of electricity around your property.
A main switch and the consumer unit are different because the main switch doesn’t send power straight to the consumer unit from the meter. It makes sure electricity doesn’t flow unsafely around the property.
By turning off the main switch cuts all power, you can ensure that nothing keeps running during emergencies or when you’re having maintenance done by electricians.
Yes! Our RCD consumer units promote more safety regulations, leading to less electrical damage which reduces resource wastage, pollution, and energy loss for properties and the environment.
Alongside this, RCD replacement consumer unit systems allow for less maintenance overall due to their long-lasting design, leading to reduced risks of electrical damage and further changes from electricians.
Retrofitting allows homeowners to integrate modern fuse boxes solutions into existing setups without a complete overhaul.
Benefits include improved efficiency, scalability, and seamless integration with current systems. Consumer unit fittings will tend to replace old fuse boxes, and so will most likely be placed in the same location on the property.
The best fuse box system for your home in Norfolk depends on your energy needs, budget, and available space. Our experts at Electric11 can help you find the perfect solution for your space and budget.
Consumer units can be referred to as electrical distribution boards or fuse boxes. We have determined that fuse boxes are a preferred term for these systems, though all can be used.
Electric11 assessed an existing solar PV system and associated electrical records in Long Stratton, highlighting documentation conflicts and items requiring follow-up.
Electric11 completed trenching for a pump electrical supply at Pip’s Bothy in Lower Common, East Runton. The project records and follow-up photographs also document the existing pump, cable route and intake equipment so that the next electrical work could be scoped safely.
Electric11 installed a 16-panel solar PV system, 11.52 kWh Fox ESS battery and Zappi EV charger at a Wymondham bungalow, creating one integrated home-energy system.
Electric11 added a 7 kW Fox ESS hybrid inverter and 11.52 kWh heated battery to an existing solar-powered home in California, near Great Yarmouth. The retrofit also included cable alterations, protection, commissioning and BS 7671 certification.
Electric11 completed PAT testing for a Wicklewood ice cream business, checking mobile catering equipment, freezers, leads and everyday appliances. Several clear pass readings were recorded, while a failed result showed the value of testing equipment before continued commercial use.
Electric11 installed a 7 kW Myenergi zappi home charger in Norton, adding new consumer units and a protected underground supply to a detached garage.
Electric11 installed a 23.04 kWh FOX ESS home battery storage system at a Norwich property, combining two EP12 Plus batteries with a hybrid inverter, protected consumer-unit connections and cabling to the main house.
Electric11 completed key electrical installation work for the new Wymondham Banking Hub, installing a communications rack and terminating a commando socket to provide power to the rack busbar. The work was coordinated within an active commercial fit-out at 45 Market Street.
Electric11 retrofitted Fox ESS battery storage to an existing solar installation at a Barnt Green home, improving how surplus generation could be used.
Electric11 upgraded a Long Stratton home with a 4.45 kW solar array, Fox ESS hybrid inverter and 5.18 kWh battery storage system.
Electric11 installed a FastAmps EV charger at an Attleborough vehicle workshop, completing the dedicated charging circuit alongside an EICR and PAT testing across 60 portable items.
Electric11 completed targeted EICR remedial works at a Norwich property, addressing C1 and C2 safety observations and preparing the fixed electrical installation for follow-up testing and certification.
Electric11 replaced an older analogue solar generation meter at a Norwich property with an Emlite ECA2 100A single-phase kWh meter, providing clear digital recording for the existing solar PV system.
Electric11 replaced a damaged sauna light and associated wiring at a leisure property in Attleborough, restoring safe and reliable illumination.
Electric11 completed a garden room electrical installation in Norwich, adding a protected supply, local consumer unit, lighting and practical socket provision for a new music space.
Electric11 checked and tested a wall light lamp holder at an Attleborough home after bulbs failed to operate correctly, confirming safe circuit conditions and compliance with BS 7671.
Electric11 installed a customer-supplied 7 kW SolaX home charger at Cherry Tree, supported by a dedicated cable run, surge protection, a Type A RCBO and replacement protective devices.
Electric11 upgraded the outside of an Attleborough home with six wall lights, three weather-resistant double sockets, three replacement switches, a fused spur and carefully routed exterior cabling.
Electric11 replaced an earth bond at a Suffolk home, completed the associated electrical testing and issued a satisfactory EICR, giving the customer clear confirmation that the recorded remedial work had been completed.
Electric11 upgraded a commercial motorsport workshop with a dedicated car-lift supply, rotary isolation, 18 LED fittings and two PIR-controlled floodlights.
Electric11 completed targeted EICR remedial works at an Attleborough property, addressing C1 and C2 observations identified during an electrical safety inspection.
Electric11 installed a certified greenhouse power supply in Attleborough using buried 2.5mm² SWA cable, protective conduit and a weather-resistant double socket.
Electric11 restored lighting throughout a Kenninghall home by replacing failed bulbs across multiple rooms and confirming that the affected light fittings were working again.
Electric11 replaced an existing shower in Norwich with a Mira Advance 8.7kW thermostatic electric shower, tested the dedicated circuit and issued a Minor Electrical Installation Works certificate.
Electric11 upgraded a conservatory in Wymondham with six downlights, a replacement LED strip, relocated sockets, new double sockets and surface trunking for a brighter, more practical space.
Electric11 installed an Evec EV charger at an Attleborough home, including dedicated cabling, trenching, post mounting, surge protection, a Type A RCBO and full electrical testing.
Electric11 installed a 13.8 kWp solar array, 7 kW FOX hybrid inverter, approximately 23 kWh of battery storage and a failover system at a home near Carvers Lane, Attleborough. The system helps the property generate, store and manage more of its own electricity.
Electric11 added three Pylontech US5000C batteries to an existing three-phase Victron system in Wymondham. The 14.4 kWh upgrade increased total battery storage to 56.4 kWh—a 34.3% capacity increase.
In Attleborough, Norfolk, Electric11 completed a 3.9 kW solar installation for a bungalow property, featuring 12 × 325 W full-black panels, a Solis 3.6 kW hybrid inverter, and a Puredrive 5 kWh battery. The system is designed to generate around 3,400 kWh per year, delivering annual savings of £918, reducing CO₂ emissions by 851 kg, and cutting grid reliance by 70%.
Electric11 installed a 1.82 kW shed solar power system in Attleborough, Norfolk, featuring 4 × 455 W full-black panels and a Fox Hybrid 1.0 kW inverter. This compact setup is expected to generate 1,300 kWh of clean energy per year, delivering annual savings of £351 and cutting 299 kg of CO₂ emissions — a smart, efficient solar solution without battery storage.
In Breckland, Norfolk, Electric11 delivered a 6.2 kW solar farm installation featuring 14 × 445 W full-black panels, a Fox Hybrid 5 kW inverter, and a Fox ESS 5.18 kWh battery. The system is expected to generate around 5,706 kWh of renewable energy per year, providing annual savings of £601.23, reducing CO₂ emissions by 1,181 kg, and achieving a 67% decrease in grid reliance.
Taking a clean and practical design approach, our focus was on creating an efficient area dedicated to renewable energy generation. Following a full review of the land, we installed a ground-mounted array featuring 48 × 405 W full-black panels arranged across three separate arrays. We advised that a 19.44 kW total system size would be the most suitable configuration for the property’s energy needs.
Taking a clean and efficient approach, our focus was to design a system that made the most of renewable energy potential. After evaluating the property, we fitted 10 × 445 W full-black panels arranged across two separate arrays. A total capacity of 4.45 kW was determined to be the most effective solution for the property’s size and energy requirements.
Taking a straightforward and modern approach, our aim was to design a practical space focused on generating clean, renewable energy. After evaluating the property, we installed a carport solar array featuring 9 × 445 W full-black panels. We determined that a 4 kW system would deliver the best balance of efficiency and suitability for the property’s energy demands.
